Posted by Matthew
Depending on the application, charging batteries can be complex process. Charging methods range from constant voltage to pulsed and random charging. Once power is being delivered back into the battery, you have to know when to stop charging!
Once a battery is fully charged, the charging current has to be dissipated somehow. The result is the generation of heat and gasses both of which are bad for batteries. The essence of good charging is to be able to detect when the reconstitution of the active chemicals is complete and to stop the charging process before any damage is done.
Typically, common household batteries are charged with a current that is kept constant and relieved when the batteries reach a predetermined potential. However, solar cells typically generate a constant voltage of 0.5V and a varying current that depends on the amount of collected light. As such, a consant voltage charging model is easier to implement. I found two respectable tutorials on building your own charger:
- AA Battery Solar Charger
- Clean Power’s Solar battery project charger
The first solution uses a diode to stop the batteries from discharging when there is no sunlight. I highly reccomend including this protection. Unfortunately, neither project implements a charge limit. You have to remove the batteries and test their charge with a multimeter. A shunt regulator is the simplest way to regulate the upper limit.
